Boat Now Pay Later – Boat Steering Australia

Boat Now Pay Later

BUY Now Pay Later available Free Delivery Australia wide
New BSA Hydraulic Steering Kit Fits most makes of Outboard Engines Up to Max 300HP Hydraulic steering system designed for use with boats powered by single outboard motors up to 300 hp. Ideal for skiffs, center consoles, bass boats and runabouts. balanced, compact steering cylinder was developed to fit these smaller splashwells. This affordable system comes with everything needed for easy installation.

Each kit includes a super low-friction helm pump, cylinder, high-pressure steering tubing and a filler kit.

Heavy Duty Steering for Max 300HP 
Features: Super low-friction helm for smooth comfortable steering Balanced cylinder, featuring a compact design that fits most splashwells
5.5 turns lock-to-lock
Included in the Steering kit
Steering Wheel
Cylinder
Pump
Installation Packing
Oil Filling Pipe
Air Bleeder
Helm Mounting Template
Includes: Helm Pump Cylinder Tubing Kit Filler Kit, Full Instructions Included with kit 
Seastar / Baystar Hydraulic steering fluid 946mL
Includes Steering Wheel Helm Hydraulic lines Length 21 Foot or 6.4 Metres is the generic supplied length.
Special Note:
Hose lengths can be custom made in Australia - Please add in notes section if a custom HOSE length is required to suit your boat!

Please Quote lengths in metric or Imperial -

Conditions apply as below:

6ft up to 25ft max lengths

or

1 metre up to 7.5 metres max lengths

No refunds are offered on custom line lengths as hoses are crimped and can't be adjusted.

Measure twice, order once!

If a custom hose length is not quoted, the generic hydraulic line length of 21 Foot or 6.4 metres will be the supplied, which will suit most boat configurations on the market.


Warranty terms are 12 months covering any manufacturer defects of the hydraulic unit. Will fit most standard outboard steering tubes of all makes and models 
Hydraulic Cylinder has a Stainless steel rod with a chrome finish
Steering Cylinder Volume 141.1cc 
Tube ID 35mm 
Rod ID 18mm 
OutPut Force 468KgF 
Stroke 214mm
Max Pressure 69 kgf/cm2 
Suitable Outboard Models:
Suzuki ,Yamaha, Tohatsu, Honda

Yamaha Outboard Suitable Models: Yamaha f75, Yamaha F90, Yamaha F100, Yamaha F115A Yamaha FL115A, Yamaha F200A, Yamaha FL200A Yamaha 115-200HP 2-stroke
115d, 150/ A/G/J/L, D150H, N/P/Q. 175A/F/G, Z175H, 200A/G/H/J/Z200N/P
Yamaha F250/FL250A,225F/G, Z240A/B/C, Z250D

Suzuki Outboard Suitable Models: (Year 2010/July ONWARDS Suzuki DF40), (Year 2010/July ONWARDS Suzuki DF50), (Year 2009/December ONWARDS Suzuki DF60), (Year 2009/November ONWARDS Suzuki DF60),
(Year 2008/August ONWARDS Suzuki DF70), (Year BEFORE 2008/July Suzuki DF70)
Suzuki DF80, Suzuki DF90 Before July 2008 Suitable, Suzuki DF90 2008 onwards Suitable,
Suzuki DF100, Suzuki DF115, Suzuki DF140, Suzuki DF150, Suzuki DF175, Suzuki DF200, Suzuki DF225, Suzuki DF250, Suzuki DF300

Honda Outboard Suitable Models: Honda Df75, Honda BF90, Honda BF100, Honda BF115, Honda BF130, Honda BF135, Honda BF150, Honda BF175, Honda DF200, Honda DF225, Honda DF250

Tohatsu Outboard Suitable Models: Tohatsu MD70B, Tohatsu MD908, Tohatsu MD115A


Leave a comment

Please note, comments must be approved before they are published